Stainless Steel Strip Coil
Stainless Steel Strip Coil is used extensively in many industries. BS Stainless coil can be manufactured with a safe edge, or oscillated to match customer requirements.
Typical uses of stainless steel slit coil include heat exchangers, heating elements, flexible tubing, filtration devices, cutlery products, springs, and surgical instruments.
Grades
Our stainless steel sheet/plate is available in 300, 400 and 200 series. Each type has its own characteristics. The most popular grades are, 304 which can be easily roll-formed or shaped and due to its excellent corrosion resistance and weldability, it is one of the most popular grades available. 316 is an alloy that contains molybdenum which increases the corrosion resistance and is particularly effective in acidic environments as it provides a greater resistance to pitting corrosion. 321 is a variation of 304 with the addition of titanium, it is resistant to intergranular corrosion and has excellent weldability. Type 430 is a ferritic stainless steel alloy which offers good corrosion resistance and is predominately used in the domestic and catering industries.
.jpg)
Stainless Steel Processing Capabilities
| Thickness | Width |
|---|---|
| 0.3mm | Up to 1000mm |
| 0.4mm | Up to 1250mm |
| 0.5mm to 3mm | Up to 1580mm |
| MAX 3mm |
Finishes
| Finish | Description |
|---|---|
| 2B | Smooth finish, reflective grey sheen. Most widely used surface finish. |
| Bright Annelaled (BA) | Cold rolled, annealed in a controlled atmosphere to retain a highly reflective finish. |
| Hot Rolled (HR) | Scaled finish, ideal if surface finish is not a key concern. |
| 2D | Cold rolled, low reflective matt surface. |
| 2E | Cold rolled, rough and dull finish. |
Other finishes are available on request.
Quality
All BS Stainless steel strip/coil is manufactured to the highest quality within the scope of ISO 9001:2015 accredited management system and manufactured to BS EN 10088-2 specification
.jpg?mode=v)
.jpg?mode=h)
.jpg?mode=v)
.jpg?mode=h)